Go-Belt® Sampling Plants
Complete Engineered Sampling Facilities for Mining and Mineral-Processing Applications
T.K.O Engineering engineers and supplies Go-Belt® Sampling Plants incorporating the required stages of primary sampling, sample transfer, preparation, division and collection for mining and mineral-processing applications.
Each plant is configured around the material stream, sampling duty, process requirements, site conditions and required downstream sample destination. T.K.O Engineering can provide mechanical, structural, electrical and control integration together with installation and commissioning support according to the project scope.
Original Go-Belt® OEM
T.K.O Engineering CC is the original developer and OEM of Go-Belt® sampling technology. GO-BELT® is a registered trademark of T.K.O Engineering CC. Go-Belt® Sampling Plants are designed and manufactured by T.K.O Engineering CC for mining and mineral-processing applications.
Go-Belt® is T.K.O Engineering's registered product and technology name and is not a generic term for cross-belt, cross-stream or hammer samplers.
Third-party servicing, maintenance or reporting on installed Go-Belt® equipment does not confer OEM, manufacturer, developer or trade-mark ownership status. Go-Belt® equipment is developed and manufactured by T.K.O Engineering CC.
From Primary Sampling to Sample Collection
A Go-Belt® Sampling Plant brings the required sampling and sample-handling stages together as an integrated engineered facility. The exact process arrangement is application-specific and may incorporate some or all of the following stages.
Stage 1 — Primary Sampling
The Go-Belt® Sampler obtains a sample increment from the material stream.
↓
Stage 2 — Sample Transfer
Sampled material is transferred through the engineered sample-handling arrangement to the next required stage.
↓
Stage 3 — Primary Size Reduction
Where required, sample crushing equipment reduces material size for downstream preparation and division.
↓
Stage 4 — Sample Division
Where required, sample-division equipment reduces sample mass for subsequent preparation or collection.
↓
Stage 5 — Secondary Preparation
Additional size reduction, division or controlled feeding can be incorporated where required by the sampling duty.
↓
Stage 6 — Sample Collection
Prepared or divided sample material is directed to the required collection arrangement for downstream handling.
↓
Stage 7 — Laboratory Interface / Downstream Analysis
The collected sample can then proceed to the mine or laboratory's required preparation and analytical process for purposes such as quality assessment, process control or metallurgical accounting. Laboratory analysis is downstream of the Go-Belt® Sampling Plant unless specifically included within the agreed project scope.
Typical Sampling Plant Components
Depending on the project scope and sampling duty, a Go-Belt® Sampling Plant may incorporate equipment and infrastructure including:
• Go-Belt® Sampler
• Sample transfer chutes
• Sample crushers
• Sample-division equipment
• Vibratory or controlled feeding equipment where required
• Sample collection arrangements
• Structural steel
• Access platforms
• Electrical and control systems
• PLC and HMI integration
• Laboratory or downstream sample interface
Integrated Engineering Scope
T.K.O Engineering can undertake the engineering and integration required to bring the individual sampling and sample-handling stages together as a complete facility.
Mechanical Engineering
Mechanical design and equipment integration for the sampler, sample-transfer arrangements, preparation equipment and associated plant components.
Structural Engineering
Structural integration including support structures, access platforms and equipment-support arrangements according to project requirements.
Chute & Sample-Handling Engineering
Application-specific chute and sample-transfer arrangements between the required sampling and preparation stages.
Electrical & Control Integration
Electrical and control integration for the sampling equipment and associated plant systems according to the project scope.
PLC & HMI Integration
Control-system integration and programming for coordination of the required sampling sequence and associated equipment.
Installation & Commissioning
Site installation and commissioning support can be provided according to the agreed project scope.
OEM Support
Lifecycle support for Go-Belt® equipment including maintenance, spare parts, inspection, refurbishment and technical support.
Go-Belt® Sampling Plant Experience
Go-Belt® sampling technology has been incorporated into engineered sampling-plant applications over several decades.
| Year | Operation | Location |
|---|---|---|
| 1992 | Vaal Reefs West Plant | South Africa |
| 2001 | Modikwa Concentrator Plant | South Africa |
| 2008 | Central Deep Plant CV-02 | Rustenburg, South Africa |
Vaal Reefs West Plant now forms part of Harmony Doornkop operations.
Central Deep Plant CV-02 now forms part of Sibanye-Stillwater operations.
See a Go-Belt® Sampling Plant in Operation
See T.K.O Engineering's genuine Go-Belt® Cross-Belt Sampler demonstrated as part of a complete Go-Belt® Sampling Plant, showing how the primary sampler forms part of the wider engineered sampling arrangement.
Official Go-Belt® sampling equipment video from T.K.O Engineering, the OEM and developer of Go-Belt® sampling technology.
Plant Installation Gallery
Why T.K.O Engineering?
OEM Sampling Technology
T.K.O Engineering is the OEM and developer of the Go-Belt® range of representative mineral sampling equipment.
35+ Years of Sampling Experience
Sampling experience developed across mining and mineral-processing applications over more than three decades.
Integrated Engineering
Mechanical, structural, electrical and control disciplines can be integrated around the requirements of the sampling plant.
Application-Specific Design
Sampling plants are configured around the material stream, sampling duty, process arrangement and site requirements.
Installation & Commissioning Support
Site installation and commissioning support is available according to the agreed project scope.
Lifecycle OEM Support
Ongoing Go-Belt® maintenance, spare parts, inspection, refurbishment and technical support.
Sampling Plant or Sampling System?
A Go-Belt® Sampling System is generally engineered around a defined sampling duty and the equipment required between the sampling point and the required sample destination.
A Go-Belt® Sampling Plant represents a broader integrated facility where the project requires multiple stages of sampling, sample transfer, preparation, division and collection together with the associated mechanical, structural, electrical and control integration.
FROM SAMPLER TO SYSTEM TO PLANT
Go-Belt® Sampler → Go-Belt® Sampling System → Go-Belt® Sampling Plant
A Go-Belt® Sampler performs the primary sampling duty. A Go-Belt® Sampling System integrates the sampler with the equipment required to transfer, handle, prepare and collect the sample for the defined application. A Go-Belt® Sampling Plant extends this into a more comprehensive, multi-stage sampling facility where the application requires additional sample preparation, division, structural, electrical and control integration.
For Mines, EPCMs and Consulting Engineers
T.K.O Engineering can work with mine owners, project teams, EPCMs and consulting engineers during the development of sampling-plant requirements, equipment selection, integration and project execution.
For project enquiries, provide available process information, material characteristics, flow conditions, sampling requirements, layout information and project-specific engineering requirements for application review.
Discuss Your Sampling Plant Requirement
Speak with T.K.O Engineering about an engineered Go-Belt® Sampling Plant for your mining or mineral-processing project.
T.K.O Engineering CC
Trevor Roberts | Engineering Project Manager
Phone: +27 82 350 4619 | Email: trevor@tkoengineering.com
© 2026 T.K.O Engineering CC. All rights reserved.
GO-BELT® is a registered trademark of T.K.O Engineering CC.